Testing Services
Situ Biosciences is an independent product testing laboratory. We test finished products, materials and formulations for antimicrobial performance, biodegradability, environmental safety and product quality, using ASTM, AATCC, ISO, OECD, JIS, AOAC, EN, EPA, USP and MIL-STD methods, or a custom protocol built around how your product is actually used.
The lab is ISO 17025 accredited (PJLA Certificate L25-635), ISO 17034 accredited (Certificate L25-636), and GLP compliant with the U.S. EPA FIFRA Good Laboratory Practice Standards (40 CFR Part 160) and TSCA (40 CFR Part 792). Our team has served the antimicrobial products industry for more than 30 years.
Choose a testing category below, or browse every test method by standard.
Our Testing Categories
| Testing category | What it answers | Commonly requested methods |
|---|---|---|
| Antimicrobial Testing | Does the product kill or prevent the growth of bacteria, fungi, algae or viruses, and is it preserved? | AATCC 100, ISO 22196, JIS Z 2801, ASTM G21, EN 13727, AOAC Use-Dilution |
| Biodegradation & Compostability Testing | Will the product break down in compost, soil, water or a landfill, and which claims can it support? | OECD 301B, OECD 302, 5338, ASTM D5511, OECD 311 |
| Ecotoxicology & Environmental Fate | How does the substance affect aquatic organisms, and how does it behave in water, soil and sediment? | OECD 201, 202 |
| Analytical Testing | What is in the formulation, and what are its physical and chemical properties? | OECD 105, and OECD 117; HPLC |
| Product Development Testing | Will a new product perform, last and meet regulatory requirements? | Shelf life, accelerated aging, environmental durability, GLP studies |
| Quality Control Testing | Is every batch performing the same way over time? | Batch preservation testing, ATP testing, certified reference materials |
Antimicrobial Testing
Antimicrobial testing shows whether a material, coating or formulation kills or controls bacteria, fungi, algae and viruses, tested the way the product will actually be used. We test treated textiles, plastics, paints and coatings, disinfectants, sanitizers, preservatives and fuels, from early formulation through finished products already on the market.
Services: Preservative Efficacy Testing · Minimum Inhibitory Concentration (MIC) · Minimum Biocidal Concentration (MBC) · ATP Testing · Microbial Induced Corrosion · Legionella Testing · Antimicrobial Additives · Antimicrobial Compliance
Popular test methods: EN 13727 · AOAC Use-Dilution · JIS Z 2801 · JSS 55555 · EN 13697 · AATCC 30 · ASTM G21 · AATCC 100 · ISO 22196 · ISO 21702 (antiviral) · USP 51 · USP 61
View all antimicrobial testing →
Biodegradation Testing
Biodegradation testing measures how completely microorganisms break a material down in a specific environment: industrial compost, soil, freshwater, seawater or an anaerobic landfill or digester. The right method depends on the claim you want to make; a product that passes OECD 301B can be called “readily biodegradable,” while an inherent test such as OECD 302B supports a different claim.
Services: Ready Biodegradability (OECD 301) · Aerobic Biodegradation · Regulatory Biodegradability
Popular test methods: OECD 301B · ASTM D6868 · ASTM D5511 · ISO 14855 · ISO 16929 · OECD 302B · ASTM D6691 (marine) · ASTM D5864 (lubricants)
View all biodegradation testing →
Ecotoxicology & Environmental Fate Testing
Ecotoxicology testing measures the acute and chronic effects of a substance on algae, aquatic plants, daphnia, fish and other organisms; environmental fate testing shows how it transforms and accumulates in water, soil and sediment. The data is commonly required for EPA and EU registration, REACH, and third-party environmental labels, and is often run alongside biodegradation testing.
Services: Bioaccumulation Testing · REACH Compliance Testing
Popular test methods: OECD 201 (algae) ·
View all ecotoxicology & environmental fate testing →
Analytical Testing
Analytical testing confirms what is in a formulation and measures the physical and chemical properties that toxicology, biodegradation and regulatory submissions depend on, including those required for EPA pesticide registration and EU Ecolabels. Methods include GC/MS and LC/MS composition and impurity analysis, water solubility, partition coefficient and dissociation constants.
Services: Formulation Composition · Trace Metals Analysis · Active Ingredient Analysis · Water Accommodated Fraction (WAF) · Agriculture & Pesticide Analysis
Popular test methods: OECD 105 (water solubility) · OECD 113 (thermal stability) · OECD 117 (partition coefficient) · ASTM D93 (flash point)
Product Development Testing
We support new products from proof of concept through formulation, performance testing and registration, so they meet manufacturer, consumer and regulatory expectations on cost, timeline and quality. Stability, aging and durability testing confirm a product keeps performing over its shelf life and in use.
Services: Shelf Life Testing · Accelerated Aging · Environmental Durability Testing · GLP Studies · Meeting Regulatory Requirements
Popular test methods: AATCC 61 (accelerated laundering) · AATCC 135 (home laundering)
View all product development testing →
Quality Control Testing
Quality control testing checks that each production batch performs like the last, so changes in formulation, raw materials or suppliers are caught before products reach customers. Programs commonly combine preservation and antimicrobial checks with viscosity, pH, stability, color and thermal cycling, and can support a quality certification program.
Services: Preservative Efficacy Testing · ATP Testing · Certified Reference Materials · Personal Care Quality Control
Popular test methods: USP 51 · ASTM E640 (cosmetics preservation) · ASTM E2694 (ATP, metalworking fluids)
View all quality control testing →
Find a Test by Standard
Already know the method you need? Browse every test we run by the organization that publishes it.
AATCC · ASTM · ISO · JIS · MIL-STD · OECD · USCC · All test methods A–Z
Find Testing for Your Industry
Agriculture · Compost · Concrete · Cosmetics & Personal Care · Electronics · Facilities · Foam · Fuel · Lubricants · Metalworking Fluids · Military · Oil · Paint & Coatings · Paper · Pet Care Products · Plastics · Textiles
How to Request Testing
- Tell us about your product and goal. Call 847-483-9950, email info@situtest.com, or request a quote. Let us know the material, how it will be used, and the claim, registration or label you’re working toward.
- Confirm the method. We’ll recommend the standard or custom protocol that fits your product and claim. For regulatory or labeling work, we recommend also confirming the method with the agency or certifier.
- Send your samples. Include the completed Sample Submission Form (PDF) with your shipment.
- Receive your report. You’ll get a written report of the results. Studies can be run under GLP when a regulatory submission requires it.
Frequently Asked Questions
What types of testing does Situ Biosciences offer?
Six categories: antimicrobial testing, biodegradation and compostability testing, ecotoxicology and environmental fate testing, analytical testing, product development testing, and quality control testing. Within them we run standardized methods from ASTM, AATCC, ISO, OECD, JIS, AOAC, EN, EPA, USP and MIL-STD, as well as custom protocols.
Is Situ Biosciences an accredited laboratory?
Yes. The lab is ISO 17025 accredited (PJLA Certificate L25-635) and ISO 17034 accredited (Certificate L25-636), and is GLP compliant with the U.S. EPA FIFRA Good Laboratory Practice Standards (40 CFR Part 160) and TSCA (40 CFR Part 792).
How do I choose the right test method?
The right method depends on the material, how the product will be used, and the claim, registration or label you need to support. Tell us about your product and goal and we'll recommend a method. For regulatory submissions and third-party labels, also confirm the required methods with the agency or certifier before testing.
What is the difference between ready and inherent biodegradability?
Ready biodegradability tests such as OECD 301B are stringent screening tests; a product that passes can be described as "readily biodegradable." Inherent biodegradability tests such as OECD 302B use more favorable conditions to show whether a material can biodegrade at all, so a pass supports a different, more limited claim.
Which test shows a plastic product is compostable?
ASTM D6400 is the U.S. specification for plastics designed to be composted in industrial facilities, and ASTM D6868 covers plastic coatings and laminates on paper and other compostable substrates. Both require biodegradation testing such as ASTM D5338 or ISO 14855, disintegration testing such as ISO 16929, and confirmation that the compost isn't harmful to plants.
Can you run a custom test?
Yes. When no standard method matches how your product is used, we design protocols that test it under representative or pilot-scale conditions, and we can adapt standard methods for new materials and applications.